Posts for: July, 2018
When decay spreads to the tooth’s inner pulp, a root canal treatment may be necessary to save it. It’s a common procedure: after removing all tissue from the pulp, the pulp chamber and root canals are filled with a special filling. The tooth is then sealed and a crown installed to protect the tooth from re-infection and/or fracture, possibly extending the tooth’s life for many years.
Sometimes, however, the tooth doesn’t respond and heal as expected: the number, size and shape of the patient’s root canals may have complicated the procedure; there may have been a delay before installing the final crown or restoration or the restoration didn’t seal the tooth as it should have, both occurrences giving rise to re-infection. It’s also possible for a second, separate occurrence of decay or injury to the tooth or crown to undo the effects of successful treatment.
It may be necessary in these cases to conduct a second root canal treatment, one that may be more complicated or challenging than the first one. For one thing, if the tooth has been covered by a crown or other restorative materials, these will most likely need to be removed beforehand. In cases where the root canal network and anatomy are challenging, it may require the expertise of an endodontist, a dental specialist in root canal treatments. Using advanced techniques with microscopic equipment, an endodontist can locate and fill unusually narrow or blocked root canals.
Because of these and other possible complications, a root canal retreatment may be more costly than a first-time procedure. Additionally, if you have dental insurance, your particular benefit package may or may not cover the full cost or impose limitations on repeated procedures within a certain length of time. The alternative to retreatment, though, is the removal of the tooth and replacement with a dental implant, bridge or partial denture with their own set of costs and considerations.
The complications and costs of a repeated procedure, though, may be well worth it, if it results in a longer life for the tooth. Preserving your natural tooth is in most cases the most desired outcome for maintaining a healthy mouth.
If you would like more information on root canal treatments, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Root Canal Treatment.”
For over a hundred years dental amalgam — a combination of silver, mercury, tin and other metals — has been an effective filling material for teeth damaged by decay. But it has one major drawback — its metallic appearance stands out in stark contrast to the natural color of teeth.
As an alternative, composite resin fillings can match the color, shape and texture of natural teeth. These materials and the techniques used to bond them are proving just as effective as and more aesthetically pleasing than dental amalgam.
Fillings help protect and preserve a decayed tooth. By first removing decayed tooth structure through drilling, the resulting void is filled with durable material that strengthens the tooth and provides it protection from further decay.
The ultimate goal for restoration is to return the tooth to as near normal form and function as possible. Dental amalgam serves well in terms of function, providing the tooth strength in the face of the daily biting forces it encounters. In contrast, composite resins excel in appearance, but haven’t always matched the durability of amalgam. They’re material construction has improved over time, though, as well as the techniques used to bond them to teeth.
Most of these bonding techniques incorporate layering. The first step is to seal the dentin (the porous, living tissue just below the enamel); we then build up the composite material layer by layer within the tooth using special bonding adhesive and curing lights. In some cases where a large volume of tooth structure must be replaced, the restoration is first formed on the tooth and then removed for curing before being cemented into the tooth or a separate restoration is formed by a dental lab.
The end result is a tooth which both looks and functions like a fully intact tooth. Though care must be taken not to subject composite resin restorations to undue forces (no cracking open nutshells, for example), your new filling should continue to serve you and look great for a long time to come.
If you would like more information on metal-free restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Natural Beauty of Tooth Colored Fillings.”
Along with periodontal (gum) disease, tooth decay poses one of the two greatest threats to your teeth. Cavities are just the start: if decay invades the pulp, the tooth’s innermost layer, the infection created can continue to advance through the root canals to the supporting bone. This worst case scenario could cost you your tooth.
But we can stop this advanced decay in its tracks with a procedure called a root canal treatment. A root canal essentially removes all the infected tissue within the tooth and then seals it from further infection. And contrary to its undeserved reputation for being painful, a root canal can actually stop the severe tooth pain that decay can cause.
At the beginning of the procedure, we deaden the affected tooth and surrounding tissues with local anesthesia—you’ll be awake and alert, but without pain. We then isolate the tooth with a dental dam of thin rubber or vinyl to create a sterile environment around it to minimize contamination from bacteria found in saliva and the rest of the mouth.
We then drill a small hole through the enamel and dentin to access the interior of the tooth. With special instruments, we remove and clean out all the diseased or dead tissue in the pulp chamber and root canals. After disinfecting the empty spaces with an antibacterial solution, we’ll shape the root canals to make it easier to perform the next step of placing the filling.
To fill all the root canals and pulp chamber, we typically use a rubber-like material called gutta-percha. Because it’s thermoplastic (“thermo”—heat; “plastic”—to shape), we can compress it into and against the walls of the root canals in a heated state to fully seal them. This is crucial for preventing the empty tooth interior from becoming re-infected. Afterward, we’ll seal the access hole with its own filling; later, we’ll bond a permanent crown to the tooth for additional protection and cosmetic enhancement.
After the procedure you may have some temporary minor discomfort usually manageable with aspirin or ibuprofen, but your nagging toothache will be gone. More importantly, your tooth will have a second chance—and your dental health and smile will be the better for it.
If you would like more information on treating tooth decay, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “A Step-By-Step Guide to Root Canal Treatment.”
We now have an amazing repertoire in dentistry to restore the look and function of damaged or missing teeth. From tooth-colored crowns to life-like dental implants, we can turn an embarrassing smile into one you’re confident to show the world.
But what if your teeth are visually unappealing but structurally sound? Perhaps they’re slightly irregular or discolored — do you still need the “heavy artillery” in our arsenal of restoration options?
Not at all — dental veneers that provide amazing aesthetic results with minimal tooth preparation may be an appropriate restoration choice for you. As the name implies, veneers are a thin layer of dental material (usually porcelain) that’s permanently bonded to the outside of a tooth. Veneers can be shaped to resemble natural teeth — especially effective for changing the appearance of small or slightly misshapen teeth — and can be customized to match an individual patient’s tooth color.
Veneered teeth require very little preparation compared to other restorations; still, most veneer applications do require some permanent enamel removal so that the applied veneers appear natural. In recent years, however, changes in veneer design and materials have made it possible for some patients to receive veneers without some tooth prep.
If taken care of properly, veneers can last anywhere from seven to twenty years (in some cases, more). While their material composition and the bonding process can withstand normal biting forces, wearers need to keep in mind porcelain is a form of glass — excessive twisting or pressures from excessive grinding habits could cause them to shatter.
And because veneers are made of an inert, non-living material, they can’t adapt to any changes that may occur biologically to your teeth and gums and may need to be updated at some point in the future. The good news is that a loosened veneer can often be repaired.
If you’d like to know if you’re a good candidate for this cost-effective, minimally invasive option, visit us for an examination. Balancing all the factors, porcelain veneers just may be your answer to achieving a better smile.
If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers.”
People with missing teeth have more replacement options than ever before, including the ever popular but often more expensive dental implant. But there has also been an expansion of choice on the more affordable side of dental restorations. The flexible removable partial denture (RPD) is one such choice.
Though RPDs have been around for some time, the newer flexible RPD offers some advantages over the more rigid traditional RPD. They’re made of a kind of nylon that’s pliable but also strong and durable. This material is thermoplastic, meaning when heated it can be injected into molds based on a patient’s individual mouth to form an accurate denture base. The gum-colored base can also be formed to cover any receded areas of the gums, which can greatly improve smile appearance.
Older versions of RPDs are made of rigid acrylic plastic that stay in place in the mouth with metal clasps that attach to remaining teeth. The flexible RPD, on the other hand, is secured with finger-like nylon extensions that fit and hold in the natural teeth’s concavities near the gum line. This, along with its relatively light weight, offers a more comfortable fit.
But aside from these benefits, flexible RPDs do have a few drawbacks. Although fracture-resistant, they’re not easy to repair or reline to readjust the fit to accommodate mouth changes. They can stain (though not as much as a traditional RPD), so they require diligent cleaning and maintenance.
We consider the whole category of RPDs as “temporary” restorations, meaning they’re intended as a transitional phase between tooth loss and a permanent restoration like a natural tooth-supported fixed bridge or dental implants. For some, however, the flexible RPD might be a more long-term solution. As mentioned before, to extend their life as much as possible they should be removed daily and cleaned thoroughly. And like any form of denture, they should not be worn overnight.
In either case, flexible RPDs offer an effective way to restore not only dental function diminished by missing teeth but an improved appearance as well. With careful maintenance, they could serve you well for some time to come.
If you would like more information on flexible partial dentures, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Flexible Partial Dentures: An Aesthetic Way to Replace Teeth Temporarily.”